Sod Plugger- Yard Butler SP-33

The Sod Plugger by Yard Butler is great for planting plugs of Bermuda, Centipede, Zoysia, St. Augustine and other turf grasses and eliminates bending over with an easy ejector handle. Featuring a steel construction the Sod Plugger extracts a 3”x3” soil core or grass plug in preparation of new planting. New grass plugs should be watered daily for 10 days to help with root-in. Guaranteed Forever! Plugging is one of the simplest and most economical ways to establish a new lawn, convert a troubled lawn, or repair a damaged lawn. Grass plugs have a complete root system and are easier to establish than sod. Length: 31.75 inches Item Dimension Width: 9.75 inches Height: 3 inches Item Weight lbs: 3.4 Material : Steel Operating Instructions 1. Water the area before digging and planting. It makes the soil easier to work with and makes the ground a moist host for the sod plug roots. 2. Position the Sod Plugger where new plug is to be placed. Step down on side foot bar to cut hole. Lift up tool to remove soil core. Remove soil core by pressing down on ejector handle. 3. Cut transplant plug from existing lawn or from new sod. Leaving the grass plug in the tool, position the Sod Plugger in the prepared hole. Press on ejector handle to insert new plug into hole. 4. Tap the plug firmly into place by stepping on it. 5. Keep plugs moist until they are well established. 6. Plant in a checkerboard pattern 12? apart.