Fixed Knot End Assembly

The fixed-knot end assembly should be installed whenever you stop a run of deer fence, such as at the side of a building. The end assembly will add the needed stability and strength to your deer fence fixed-knot system. Without end bracing the fixed knot deer fencing will sag and pull the line posts out of the ground. The end assembly includes 3 ½” galvanized steel brace posts which is almost 2 inches larger in diameter than the traditional galvanized fence post. This corner assembly will construct 1 complete end to be used with either 7' or 8' fixed-knot deer fencing. Ships via freight carrier. Additional shipping costs apply. Each end assembly includes: (2) 13’ x 3 ½” Sch 40 High Tensile Brace Posts (1) 6’ x 3 ½” Sch 40 High Tensile Pusher Post (2) 12’ x 2 ½” Sch 40 High Tensile Pushers (1) 10’ x 2 ½” Sch 40 High Tensile Cross Member (6) 1 7/8” Pressed Steel Rail Ends (6) 3 ½” x 1” x 1/8” Brace Bands (6) 12 - 1 ½” x ¾” Carriage Bolts (3) 3 ½” Pressed Steel Dome Caps